MakersHub is AP automation for NetSuite that writes every bill line with its subsidiary, department, class, Location, customer or project and custom segments, through NetSuite's own token-based API. It matches lines to NetSuite purchase orders and creates the item receipt, routes approval to people without NetSuite licenses, pays each subsidiary from its own bank account and posts bills within seconds of approval.
A NetSuite dimension is any field NetSuite can report on at the line level: the standard ones are subsidiary, department, class and Location, and custom segments add the ones your business defines. An AP tool that drops a dimension at the bill step forces someone to re-enter it in NetSuite.
When this applies
You run NetSuite, with several subsidiaries or Locations, and bills that carry project, job or custom-segment coding on every line, whether that is a few hundred bills a month or several thousand. Your current AP tool was built for QuickBooks and treats Location as a custom field it cannot automate, or it is a spend platform whose NetSuite sync fails for reasons no one can name. Vendor bills are PO-backed and someone matches them by hand, or they arrive as 60-page scans that one tool reads as a single total.
The AP lead at a smart-home design and installation company on NetSuite, about 2,000 bills a month and 80 percent PO-backed:
"We are currently in Ramp bill pay, and incredibly unhappy with it."
A controller at an engineering and construction firm on NetSuite, about 450 bills a month with three required fields on every line, described the job: customer job, project segment and activity code on each line, plus 10 percent retainage held on subcontractor bills.
How NetSuite handles vendor bills on its own, and where the AP step breaks
NetSuite's vendor bill is dimensional by design and its approval controls are real. Oracle's documentation on Vendor Bill Approvals states that approving a bill "requires the Vendor Bill Approval, Bills, and Find Transaction permissions."
A bill must be opened in Edit mode to approve it, and that conditional or non-sequential routing is built as a SuiteFlow workflow, NetSuite's tool for building custom approval steps. It also states that once a bill is entered against purchase order items, "an additional bill can't be entered against the same purchase order items" unless the first bill is rejected.
Those rules assume a NetSuite user keys the bill, with every line coded, before approval can start. That is the work: reading the document, assigning the subsidiary and Location, coding each line to the right segment values, matching lines to the PO, and getting a project manager without a NetSuite login to approve. An AP tool earns its place by doing that work and handing NetSuite a finished vendor bill.
What to evaluate in a NetSuite AP tool
Every dimension, on every line. Ask to see a posted vendor bill in NetSuite with subsidiary, department, class, Location, customer or project and each custom segment filled on each line. MakersHub pulls the segment values and native lists from NetSuite and writes them per line. You set your coding rules once, and MakersHub applies them everywhere. Where a native list does not come through on first connection, as a senior-living operator's distribution-template list did not, the fix is a permission in the integration role, not a workaround.
Subsidiary modeling, including the bank account. Each bill must land in the right subsidiary, and each subsidiary pays from its own bank account. In MakersHub the subsidiary is assigned by rule from the bill-to entity, ship-to address, vendor or inbox, and the paying bank account follows the subsidiary automatically. One advisor's rule for a roll-up with dozens of subsidiaries: get the subsidiary structure right first, because it is hard to change later.
PO matching that produces the item receipt. Open NetSuite POs sync in, bill lines match to PO lines, partial receipts are supported, and on approval the PO is received and billed and the item receipt, NetSuite's record that the goods arrived, is created. Variances are flagged before approval. One bill against several POs, or several bills against one, should both work. Line-level matching is covered in how contractors match subcontractor and supplier invoices to purchase orders.
Approvals without NetSuite licenses, and without a seat charge. Approvers act from email on a phone, see only the bills routed to them, and do not need the NetSuite permissions Oracle's documentation requires for in-system approval. MakersHub charges no per-seat license for approvers. Rules key on any NetSuite dimension and stack by amount, Location, vendor or project, with no limit on the number of projects a rule covers; one incumbent tool capped a rule at about 20.
Seconds, not batches. A bill should post to NetSuite within seconds of approval, with an option to post on the first approval so AP aging is current. A tool that uploads in batches leaves the ledger behind by a day. Sync timing, Sync on First Approval and consolidated line sync are covered in how multi-entity companies on NetSuite automate AP with entity-level approvals.
Sync errors with reasons. When NetSuite rejects a bill for a closed period, a missing tax nexus (the state or region where you owe sales tax) or an inactive account, the bill should show the reason and offer a retry. A smart-home company's incumbent tool failed a few hundred bills a month with errors "nobody can identify, nobody can solve." MakersHub shows the NetSuite response on the bill.
Payments posted on the payment date, in the bill's currency. MakersHub posts the vendor payment to NetSuite on the payment date, when funds leave the account, against the bills it covers; a payment made in NetSuite marks the bill paid in MakersHub. International vendors are paid in more than 100 currencies from a U.S. bank account. Batching, authorization and remittances are covered in how to pay vendors by ACH and check from an AP automation platform.
Retainage and credits as bills, not workarounds. A subcontractor bill with 10 percent retainage is split into two bills in MakersHub, with the retained portion held as its own bill until it is released and approved, so NetSuite shows the payable and the holdback separately. Vendor credits post as negative vendor bills and are applied in the payment run.
Sandbox first, with the right permission set. Most companies connect a NetSuite sandbox, run live bills through it, then paste in the production token. The integration role needs REST Web Services (NetSuite's permission for outside apps to read and write records) and Custom Segments permissions in addition to the transaction and list permissions; a missing one is the usual reason a list does not appear. A sandbox refresh wipes the role and token, which are recreated.
Evaluation checklist
Requirement
What to check in a demo
How MakersHub does it
Line-level dimensions
Posted bill shows subsidiary, department, class, Location, project and custom segments per line
Values pulled from NetSuite lists and segments, written per line
Subsidiary and bank account
A bill for subsidiary B pays from subsidiary B’s account without manual selection
Subsidiary by rule; bank account follows subsidiary
PO match and item receipt
Match a six-page bill to two POs; receive a partial quantity; see the receipt in NetSuite
Line-level match, partial receipt, item receipt on approval
Approvals
A project manager without a NetSuite login approves from a phone
Email approval, any dimension as a rule condition, no seat charge
Posting speed
Approve and watch the bill appear in NetSuite
Seconds after approval, or on first approval
Error handling
Post into a closed period and read the error
NetSuite’s response shown on the bill, retry available
Payments
Pay three bills and check the payment record and bank statement
Payment posted on the payment date; one bank debit per vendor payment
Credits and retainage
Apply a credit memo; hold 10 percent of a subcontractor bill
Negative vendor bill; retained portion held as its own bill
Sandbox
Connect a sandbox and run live bills before production
Token per environment; permission set documented
What the incumbents are built for. Spend platforms with a NetSuite connector are built around the card program; prospects on NetSuite describe PO matching that does not read quantities, credit memos applied one at a time, and remittances that vendors cannot read. Tools built for QuickBooks treat NetSuite's Location and custom segments as unsupported custom fields. Neither is wrong for the business it was designed for. MakersHub is built for the bill that carries a project, a Location and a custom segment on every line.
Proof
An engineering and construction firm on NetSuite, about 450 bills a month, requires a customer job, a project segment and an activity code on every line and holds 10 percent retainage on subcontractor bills. In its first session it saw a 68-page vendor PDF split into 62 bills and credits, line coding to all three fields, retainage held as a separate bill, and approval rules with no cap on the number of projects.
A smart-home design and installation company on NetSuite, about 2,000 bills a month with bills up to 60 pages, is leaving its spend platform over PO matching that ignored quantities and a few hundred unexplained sync errors a month. It watched a six-page bill match line by line to its NetSuite POs with the receipt status visible, a step its incumbent does not perform, and set a target to be off that platform within two quarters.
An electric motor manufacturer on NetSuite, 500 to 800 bills a month and growing toward 3,000, compared MakersHub's line-level three-way match and partial PO closure against a spend platform.
An insurance software company on NetSuite, 600 to 1,000 bills a month and half PO-backed, confirmed payment in more than 100 currencies from one U.S. account.
What it doesn't do
MakersHub is the AP layer in front of NetSuite, not a replacement for NetSuite's reporting. Budget-versus-actual alerts stay in NetSuite today, where the budget lives. Corporate card charges are imported from the card statement and processed line by line as bills rather than pulled from a live card feed, so card detail arrives on the statement cycle.
Purchase orders are created in NetSuite and matched in MakersHub; PO and item-receipt creation inside MakersHub is on the roadmap. Payments fund from a U.S. bank account, so a non-U.S. subsidiary codes and approves in MakersHub and releases payment from NetSuite today. And a coding change made in NetSuite after a bill posts stays in NetSuite; payment status is what flows back.
Frequently asked questions
Yes. MakersHub pulls custom segments and line custom fields from NetSuite and writes them on each bill line, including GL-posting segments, the ones that hit the general ledger. Rules can set a segment value from the vendor, the ship-to address, a line description or the PO.
Each NetSuite subsidiary can pay from its own bank account when the AP tool links the account to the subsidiary. In MakersHub, the subsidiary is assigned to the bill by rule and the paying bank account follows it automatically, so AP does not select an account per payment.
NetSuite rejects a vendor bill when it posts into a closed period, is missing a tax nexus or uses an inactive account. MakersHub shows NetSuite’s response on the bill, so the reason is visible, and offers a retry once the problem is fixed in NetSuite.
A vendor credit should reduce what you pay that vendor in the next payment run. In MakersHub, a vendor credit posts to NetSuite as a negative vendor bill and is applied in the payment run.
Approving inside NetSuite requires a NetSuite login with the Vendor Bill Approval, Bills and Find Transaction permissions. MakersHub approvers need no NetSuite license: they approve from email in one click, on any device, and see only the bills routed to them.
The bill is split into two bills, the payable portion and the retained portion. The retained bill is held until it is released and approved, so NetSuite carries the holdback as its own payable.
A vendor payment should post to NetSuite when funds actually leave your account, so the ledger matches the bank. MakersHub posts it on the payment date as a vendor payment against the bills it covers, and a payment made directly in NetSuite marks the bill paid in MakersHub.
Yes. A NetSuite sandbox is a test copy of your account, and most companies evaluate MakersHub there first. The sandbox connects with its own token, the production token is pasted in when the mapping is settled, and the integration role needs REST Web Services and Custom Segments permissions.
Yes. Open POs sync in, lines match to PO lines with partial receipts, variances are flagged, and on approval the PO is received and billed and an item receipt is created in NetSuite.
A spend platform is built around its card program and reads bills to pay them. MakersHub is built around the bill line: dimensions, PO lines, item receipts, retainage and credits are handled before payment, and payment is a separate authorization.
Yes. MakersHub is SOC 2 Type II certified. Check payments carry Positive Pay protection, and vendor bank details are collected through an encrypted, single-use link rather than imported, so a changed account number can’t slip through.
MakersHub is AI-first accounts payable automation for businesses that track spend by job, project, program or entity. It captures every line of every bill, codes it, routes approvals and pays vendors, with native two-way integrations to QuickBooks Desktop, QuickBooks Online, NetSuite, Sage Intacct, Xero and Intuit Enterprise Suite. MakersHub is rated 4.9 out of 5 on G2 (October 2026). Every dollar has a job. Hold yours accountable.
See how MakersHub helps organizations that track spend by project, location, program or entity get every line of every bill coded and approved before it's paid.